Op deze pagina ...

WAARSCHUWING: Deze hack is niet zonder risico's! Er is bovendien een meer recente versie beschikbaar: De OS6 Hack. Zoals een aantal mensen al gezien hebben, de TiVo pagina's die we tot nu toe hadden hebben betrekking op de ouder SA (Stand Alone) TiVo's. Deze TiVo's zijn bedoeld voor standaard TV aansluitingen (TiVo's zijn niet beschikbaar in Nederland - de service ontbreekt helaas). DirecTV biedt ook TiVo's aan, echter voor het ontvangen van digitale Satelliet signaal (alleen voor DirecTV). De voordelen; - De (aangepaste) MPEG2 stream (die volledig digitaal van de satelliet komt) wordt direct naar harddisk geschreven - De receiver heeft in feite 2 receivers ingebouwd zitten, waar door 2 opnames, etc simultaan gedaan kunnen worden Op deze pagina laat ik je zien hoe je deze TiVo (op basis van een Hughes SD-DVR40) kunt hacken naar het nieuwere operating system van TiVo - OS4 welke voor standalone's al even beschikbaar is. Deze beschrijving zal ook werken voor andere merken aangezien het binnenwerk identiek is. De beste plaats voor aanvullende TiVo informatie is DealDatabase. Voor kopers: bezoek de TiVo website of kijk op eBay. Bedenk wel: De TiVo service is niet beschikbaar in Nederland! Merk op: Dit artikel kan gezien worden als een vervanging van de Sleeper Hack die ik eerder gepubliceerd heb. Mocht je de Sleeper Hack hebben toegpast: geen probleem! De disk zal overschreven worden door het OS4 image. Het kopieren van opnames naar de PC kan op meerdere manieren gedaan worden. Een daarvan wordt beschreven in het tyTools artikel. WARNING: LinkSys heeft de hardware van de USB200M ethernet adapters aangepast waardoor de nieuwere modellen (versie 2) niet meer werkt met de TiVo. Versie 1 modellen werken overigens nog wel prima. Lees de Disclaimer! Lees dit bedankt woord!!!! Veel dank aan David Dellanave die de basis uitgewerkt had op zijn website (waardoor het maken van deze guide wel erg eenvoudig was) en de mensen van DealDatabase (specifiek, maar niet uitsluitend: Riley, Stevel, inet22, RC3105, AlphaWolf, NutKase, AllDeadHomiez, AhoyMatey, MuscleNerd, en Robert), en de mensen van PTVUpgrade. Zonder hun informatie, patches, hacks, truuks, en diensten had deze hack NOOIT mogelijk geweest! Merk op: Niet iedere auteur van patches enz is even "happy" met een guide zoals deze, maar ik ben van mening dat dergelijke hacks niet beperkt dient te worden tot de groep alwetende TiVo goeroes. Toch wil ik mijn respect tonen naar hun, en daarom zijn de benodigde bestanden niet downloadbaar van WeetHet. Jammer, maar het is niet anders. Overigens hebben de auteurs vaak goede redenen waarom bestanden alleen via DealDatabase gedownload mogen worden - anderen hebben hier in het verleden misbruik van gemaakt en de nodige ellende veroorzaakt. Note: Vor je vragen gaat plaatsen op DealDatase: GEBRUIK DE ZOEK FUNCTIE EERST! En vergeet niet: ER IS EEN SECTIE VOOR BEGINNERS (Newbies)!

Overview

Note: this is NOT a hack to freely use either the DirecTV service, or the TiVo-service!

Specially TiVo should be credited for it's effort to create an open system, so we can modify the TiVo to our needs!

I'm not so sure about DirecTV - since they still do not listen to their customers, they can be pretty arrogant and stubborn, not to mention plain insulting when talking to their customer service on questions why HMO is not available on DirecTV TiVo's. According to their "technical people" this hack is not even possible. So here ya go: load a crap!

The aim of this hack is:

• Upgrade your TiVo and give it some more recording space (optional).
• Make your DirecTV TiVo run OS 4.x (including those nice features like folders, HMO, look at pictures, share recordings, etc)
• This will enable the TiVo's USB ports which we can use the ports for Ethernet connection.
• Enable FTP/Telnet/TiVoWeb etc, so we can remote control our TiVo.
• Enable TyTools so we can copy a movie from the TiVo harddisk to our PC, so we can burn our recordings to VCD, SVCD, DVD or DivX.

I HIGHLY recommend upgrading to a bigger harddrive.
By default the Hughes SD-DVR40 has a 40Gb disk, good for about 35 hours of movies. Get a 120Gb disk (You can get one for less than $100!), this will give you 110 hours ...

Another reason to use another harddrive is that this way the original drive remains in tact and can be put back in the TiVo if things do not work out the way they should.

• STEP 1 - Read the Assumptions
• STEP 2 - Getting a Tivo 4.x image and a boot CD legally
• STEP 3 - Getting some additional tools and patches
• STEP 4 - Burning the Boot CD and Tool CD
• STEP 5 - What else do we need?
• STEP 6 - Removing the harddisk from your TiVo
• STEP 7 - Installing the NEW TiVo harddisk in your PC
• STEP 8 - Installing TiVo 4.x on the new harddrive
• STEP 9 - A new kernel
• STEP 10 - Some additional hacks
• STEP 11 - Putting the new disk into the TiVo
• STEP 12 - Even more patches (enable HMO and such)

STEP 1 - Read these Assumptions

Before you begin, it's a good idea to read the now following assumptions!

• We will use a LBA48 kernel. Basically this is only needed for disks >137Gb, but it works just fine with smaller disks.
  
• We'll asume some knowledge of Linux. It's not 100% required, but it will help you understand what you're doing.
  
• We asume the new TiVo disk (yes we asume a upgrade of disk size - do NOT use the original disk!) to be connected secondary IDE controllor (HDC), MASTER.
  
• We also asume you hook up your CDRom drive as secondary SLAVE (HDD).
  The picture below illustrates this. It's OK if another disk or CDRom is connected to the primary IDE controller as a Slave.
  Details can be found in this guide.
  
• Be carefull with the cable going from the mainboard of your TiVo to the front buttons! There have been reports of TiVo been damaged by a loose cable!
  
• For full use off all features; a USB ethernet adapter is required!
  
• A serial cable is not needed, but in case of trouble handy to fix things.
  
• I applied this hack to a Hughes SD-DVR40 RID model, using a 120Gb harddisk (replacing the original).
  
• The hack is supposed to work with RID and non-RID models!
  
• Have the DirecTiVo make a call "home" before applying the hack (enable card, etc).

Step 2 - Getting a TiVo 4.x image and a Boot CD

Goto www.ptvupgrade.com, select from the "Products & Services" menu, the submenu "Software Tools".

There you will find the "InstantCake" and "LBA48 BootCD".

Both need to be purchased (InstantCake: $19.99, BootCD: $5). A little price knowing that:

a) the image a a real and correctly working image of a TiVo 4.x (known GOOD image)
b) the image is optained legally.

The INSTANTCAKE image you will need is either the "TIVO/TCD240040" (40Gb disks) or the "TIVO/TCD240080" (according to the explanation this last one is good for ALL disksizes, so >40Gb).

DirecTiVo user: YES YOU NEED THE STANDALONE VERSION! NOT THE DIRECTIVO VERSION!!!!

The tools CD is what they refer to as the "PTVupgrade LBA48 CD with MFStools and Enhancements" CD (code: LBA48-401DD).

I would say for almost $25 it's worth while to do the right thing ...

STEP 3 - Downloading Additional Tools

From the DealDatabase we need to get some more tools. The InstantCake and the Boot CD are just a part of the puzzle here.

We need:

Now you might wonder why I'm not offering this on the WeetHet download page.
That has 2 reasons:

1. Most of the creators do not want to see there files elsewhere popping up.
2. The threads explain a lot about these tools, and also give you links to support threads.

So unless they approve that I make an archive available with their scripts/patches, I will not have it in my downloadspage out of respect for their work.

STEP 4 - BURNing two CD's

Before we can do anything we will need to create ourselves TWO cd'S.
One which will be the LBA Boot CD from PTVUpgrade, and another one holding all these fancy tools and the TiVo 4.x image.
This is what the directory/file structure should look like of the "Tools CD". The easiest way is to make a folder somewhere on your harddisk and call it something meaningful. Then copy the individual files in there according to this structure.

To achief this, we need to extract some of these files:

• bootpage-20040921.zip ... bootpage directory
• tivotools.tar.rar ... tivotools.tar file
• superpatch-4all-NutKase-0.7.1.zip ... superpatch-4all-NutKase-0.7.1.tcl and set_mrv_name_ADH.tcl

We also need to extract the TiVo 4 image from the ISO file. There are some tools out there that can help you with that.
I used WinRar to extract the full ISO image. Once extracted in the folder "_IMAGE" you will find a file called "000001".
Rename that file to "tivo.mfs", and copy it into the "image" folder.

The sturcture should look tlike this (as suggested by David Dellanave):

bootpage (DIR)
| bootpage (FILE)
| bootpage.c
| bootpage.h
| bootpage.tgz
| Makefile

dssapp (DIR)
| dssapp

image (DIR)
| tivo.mfs

guide_patch_v401b.tcl
init_framework.tgz
lba48_2.4.18.px
set_mrv_name_ADH.tcl
superpatch-4all-NutKase-0.7.1.tcl
tivotools.tar

(download the files - except for the 4.x image - from the indicated threads at DealDatabase!)

Once you have assembled this structure you can copy it all into the root of a CD (use Nero for example to build a CD like that).

Nero is an ideal tool for creating the "Tools CD"

Note: I requested permission form the authors/posters of the relevant article to give me permission to package this all. For several (good) reasons some of them declined.

The second CD we need to burn is the "ptvlba48-4.01DD.ISO" Boot CD from PTVUpgrade. Again Nero can be of assitance here as it allows you to burn ISO files (choose from the menu "Recorder" - "Burn Image" and select the ISO file).

Mark both CD's properly, so you will be able to identify them later (I marked them as "Boot CD" and "Tools CD").

STEP 5 -What Else do we need?

1. Screwdrivers
   Basically we need a Torx T10 and a Torx T11 screwdriver.
   Some models might need a Philips screwdriver.
   
   
2. An open PC
   We need a PC, any PC, with at least one harddisk and a CD Rom player installed in it, and being able to boot from CD Rom
   There are no speed limitations etc on the type of PC, as long as it can do this:
   
   • The harddisk must at least have one partition (usually the C-drive) formatted with FAT or FAT32, with at least 2 Gb free space. This free space will hold the backup image of the original TiVo harddisk.
   The harddisk must be installed as MASTER on the PRIMARY IDE (IDE-0).
   
   • The CD Rom player must be installed as the SLAVE on the PRIMARY IDE (IDE-0).
   We need this so we can boot the system from the Sleeper CD Rom
   
   • The PC must be able and set to boot from CD Rom (in the PC BIOS, set FIRST BOOT DEVICE to CDROM).
   
   
3. IDE Flat cable
   So we can connect our original TiVo harddisk to the PC we will utilize for hacking the drive.
   Some PC's have this second IDE cable already installed - so check first!
   
   
4. Replacement harddisk (strongly recommended)
   Since prices are so low, I would recommend getting a 120Gb disk or larger.
   5400 RPM (if you can get one) will work just fine (low noise level).
   A 7200 RPM or even 10000 RPM drive will give you a better performance but they also produce a bit more noise and heat.

STEP 6 - Removing the harddisk from your TiVo

OK, so we're ready to open the TiVo and removing the harddisk.

Remove ALL the cables from your TiVo (satellite antenna, video, audio, power, etc)!

Now put the TiVo on a table so you can easily access all connectors, screws etc.
Get the Torx T10 and remove the 4 screws on the back, indicated by the red arrows below:

Hughes DirecTV TiVo - Remove the 4 screws on the back

Once you removed the 4 screws, slide the hood of the TiVo to the backside of the TiVo. It might require some force to get it going.

Hughes DirecTV TiVo - Remove the hood by sliding it to the back

Once you opened, you will see the main components of your TiVo:

Hughes DirecTV TiVo - A: Harddrive, B: Power supply

Be very careful, avoid touching the power supply (B: the brown colored PCB).

Now we have access to the harddrive (A). You will see that an IDE flat cable and a power cable (familiar to those who have opened a computer before) that connect the harddrive to the TiVo mainboard (the green PCB).

Hughes DirecTV TiVo - Harddisk located

In the image above you see the harddrive. Notice the arrows:

I think the table above explains most of it;

Remove the screws (A and B), the power cable (C)(watch out for the white flat cable!) and the IDE cable (D).

Now move the harddisk in the direction as indicated by the arrow (E) until you can lift it and take it out.

The 4 screws of the harddrive can be removed with a Torx T11.

Once removed, we can continue with the next steps,...

STEP 7 - Installing the TiVo harddrive in your PC

Note: Unlike the sleeper hack (since this hack does not make a backup!), there are not requirements for the C-disk (primary master).

This PC should also have a CD Rom player. Make sure the following requirements are met:

• The computer should be able to BOOT from CDROM.
• The CDROM player should be connected as SLAVE on the SECONDARY (IDE-1) IDE.
• The new harddrive should be connected as MASTER on the SECONDARY (IDE-1) IDE.

Tip: Verify in the BIOS of your PC that the first boot device is set to CDROM.
Usually you can get into the PC's BIOS by pressing the "Del", "Ins", "F1" or "F10" button (at boot time it will usually show a brief message indicating which key to use). Commonly in the "Advanced settings" section of the BIOS you can change the boot device to "CDROM" or "IDE CDROM".

If your computer meets these requirements, then it's time to continue to the next step: Connect (if not already there) the FLAT CABLE to the SECONDARY IDE (IDE-1). Connect the other end of the flat cable to the new TiVo harddrive.
Connect the second connector of that FLAT-CABLE to your CDRom drive.

Connect a power connector to the TiVo harddrive, and don't forget the power for th CDRom-drive.

Verify that the jumpers of the TiVo harddrive are set to MASTER, and the ones on the CDRom drive to SLAVE.

Please write down first how the jumper where set, so you can set them back later - if needed.

Tip: if you do not have documentation on the jumpers (either a manual or printed on the harddrive itself) then lookup the drive on the Internet on the manufacturers homepage. They usually have an online manual for the drive showing the jumper settings.

So basically you have this setup now:

DirecTiVo - Basic Backup setup

Note: this is just a sketch on how the connections should run - the position of IDE-0 and IDE-1 connectors may differ, depending on the type/brand of mainboard your PC has. Please consult the manual of the mainboard to identify the right connectors, or incase you don't have a manual, look closely on the mainboard. Some mainboard's have text printed next to the connectors.

STEP 8 - Installing the 4.x Image on the harddrive

In order to write the image to the harddrive, we must first boot our PC using the BootCD. This will boot the Linux operating system.

At boot it will show you the ISOLINUX message and will give you some options. Just press ENTER here.
Loading vmlinuz ..... will appear and the bootsequence is running now.
This particular Linux version will try to autodetect whatever hardware it needs for the hack.

Note: I like to recommend using a PS/2 keyboard. This Linux distro seems to have issue with either my USB-bus or USB Keyboard (Logitech).

Once your system has booted, again some options are presented. Hit ENTER again.
Now you will see a cursor blinking in a DOS-like environment (a shell prompt "PTVupgarde /#" will be visible).

Now remove the BootCD, and insert the ToolsCD.

Before we can use the ToolsCD we need to mount it (the yellow test is what you enter, finish each line with pressing ENTER):

PTVupgrade /# mount /dev/hdd /cdrom
mount: block device /dev/hdd is write-protected, mounting read-only
PTVupgrade /# 
      

Next step is to write the image to the harddisk:

PTVupgrade /# mfsrestore -s 127 -xzpi /cdrom/image/tivo.mfs /dev/hdc 
Starting restore
Uncompressed backup size: 818 megabytes
Restoring 818 of 818 megabytes (100.00%) (79.62% compression)
Cleaning up restore.  Please wait a moment.
Restore done!
Adding pair /dev/hdc14-/dev/hdc15
New estimated standalone size: 131 hours (52 more)
PTVupgrade /#

The numbers in this example may very (depending on image size and harddisk size).

Note: Some people might run into trouble here when using a 40Gb disk. This has to do with the slightly differeny geomtery of your disk. David suggest on his website to decrease the size of the swap to 50M (-s 50). But that's for more experienced users.

Once completed execute the following commands:

PTVupgrade /# cd /
PTVupgrade /# umount -f -a -r
PTVupgrade /# halt
The system is going down NOW !!

The system will not shutdown - a reboot is mandatory!

We now copied the 4.x image to your new harddrive. But we're not done yet!

STEP 9 - A new Kernel

The PTVupgrade CD comes with some handy tools for mounting, kernel copying, and such. We'll now first do some mounting and replace the kernel.

So we have to boot the PC again using the BootCD.

At boot it will show you the ISOLINUX message and will give you some options. Just press ENTER here.
Loading vmlinuz ..... will appear and the bootsequence is running now.
This particular Linux version will try to autodetect whatever hardware it needs for the hack.

Once your system has booted, again some options are presented. Hit ENTER again.
Now you will see a cursor blinking in a DOS-like environment (a shell prompt "PTVupgarde /#" will be visible).

Now to work with the bootCD we need to mount it, and we need to prepare the mount of the harddisk by making a directory for it:

PTVupgrade /# mount /dev/hdd /cdrom
mount: block device /dev/hdd is write-protected, mounting read-only
PTVupgrade /# mkdir /tivo
      

Next step is mount the TiVo harddisk, one of the following two commands will work, the other one will fail.
If it replies "mount: you must specify the filesystem type" then this means this one failed. Try the other one.

Option 1:

PTVupgrade /# mount /dev/hdc7 /tivo
PTVupgrade /# 

Option 2:

PTVupgrade /# mount /dev/hdc4 /tivo
PTVupgrade /# 

Once mounted we need to extract and copy the kernel to the new disk:

PTVupgrade /# cp /cdrom/s2_kernels/3.1.1c/vmlinux.px.gz /tivo/var/vmlinux.px.gz 
PTVupgrade /# cd /tivo/var 
PTVupgrade /# gunzip -d -v vmlinux.px.gz 
vmlinux.px.gz:     38.3% -- replaced with vmlinux.px
          

Tip: Linux has a cool Shell feature where the TAB-key can be used to "autocomplete" commands, filenames, pathnames, etc.
So instead of typing the very long copy command, you could type: cp /d[TAB]/s2_[TAB]/3.1.1c/vm[TAB]. Where [TAB] represents you pressing the TAB key. This line will then automatically expand to the full names. It will save you a lot of typing ...

Now we put the killhdinitrd kernel in both kernel partitions. One is enough, but this way we do not need to which one is used with the bootpage:

PTVupgrade /# dd if=/tivo/var/vmlinux.px of=/dev/hdc3

1+1 records in
1+1 records out
PTVupgrade /# dd if=/tivo/var/vmlinux.px of=/dev/hdc6

1+1 records in
1+1 records out

STEP 10 - Additional Hacks

We will no continue to add some more hacks

Now it's time to go to the ToolsCD. We do need to unmount the BootCD first, swap CD's, and mount the ToolsCD.

Now to work with the bootCD we need to mount it, and we need to prepare the mount of the harddisk by making a directory for it:

PTVupgrade /# umount /cdrom
      

Remove the BootCD, and insert the ToolsCD. Then type:

PTVupgrade /# mount /dev/hdd /cdrom
mount: block device /dev/hdd is write-protected, mounting read-only
      

So on with the ToolsCD. First let's copy the required files to a hack directory:

PTVupgrade /# mkdir /tivo/hacks
PTVupgrade /# cp /cdrom/superpatch-4all-NutKase-0.7.1.tcl /tivo/hacks/ 
PTVupgrade /# cp /cdrom/set_mrv_name_ADH.tcl /tivo/hacks/ 
PTVupgrade /# cp /cdrom/guide_patch_v401b.tcl /tivo/hacks/

Next we will install the "init framework":

PTVupgrade /# cd /tivo
PTVupgrade /# tar -zxvf /cdrom/init_framework.tgz
./
./init
./init/001_bash.init 
./init/010_lba48.init 
./init/011_uma6fix.init 
./init/kmonte.o 
./init/monte 
./init/uma6fix.o 
./init/uma6fix_license.txt
./test.conf 

Now we need an extra step for so called RID models.

RID models can be identified by looking at the back of the receiver. There is a label identifying the brand and model (mine has it's sticker where the power goes into the TiVo).

RID models have a RID number there. Something like "RID: 000012345678".
My Hughes SD-DVR40 is a RID model.

We need to replace the original DSSAPP with our new one.
First we move (mv) the original file (rename it), then we copy (cp) the new file to this location, and finally we make the new file executable (chmod):

PTVupgrade /# mv /tivo/tvbin/dssapp /tivo/tvbin/dssapp.orig 
PTVupgrade /# cp /cdrom/dssapp/dssapp /tivo/tvbin/
PTVupgrade /# chmod +x /tivo/tvbin/dssapp

Now we need to copy the kernel to a place where the "init framework" expects it to be:

PTVupgrade /# cp /cdrom/lba48_2.4.18.px /tivo/init/vmlinux.px

We will no continue with the installation of the TiVo BusyBox and TiVoFTP deamon, etc.

PTVupgrade /# mkdir /tivo/busybox 
PTVupgrade /# cd /tivo/busybox 
PTVupgrade /# tar -xvf /cdrom/tivotools.tar

This will generate a long list of files that are extracted to /tivo/busybox.

The next step should be done carefully! It writes the bootpage so the TiVo knows where to boot from, and sets a few things like not to do software updates, etc. So pay attention here!

PTVupgrade /# cd /cdrom/ 
PTVupgrade /# ./bootpage/bootpage -p /dev/hdc 
root=/dev/hda7
      

This "bootpage" command will respond with either "root=/dev/hda7" or "root=/dev/hda4", make a note of this.
As of now I will asume /dev/hda7. Replace this with /dev/hda4 if you got a respons that said "root=/dev/hda4".

The now following command is ONE SINGLE line! I had to wrap it so it would be in a reasonable size for this webpage!
After the "-p" there is a SPACE before the double quotes!

Naturally, if you're using /dev/hda4, then enter /dev/hda4, and not /dev/hda7!

PTVupgrade /# ./bootpage/bootpage -P
"root=/dev/hda7 dsscon=true console=2,115200 upgradesoftware=false" -C /dev/hdc
Updated bootpage on /dev/hdc
Updated bootpage on /dev/hdc
      

Check the outcome of this action as such, make sure the reply of the program matches the one you see below (naturally, if you're using /dev/hda4, then it should say /dev/hda4, and not /dev/hda7):

PTVupgrade /# ./bootpage/bootpage -p /dev/hdc 
root=/dev/hda7 dsscon=true console=2,115200 upgradesoftware=false

We will now edit the rc.sysinit.author. We will use the editor "pico" for that purpose.

PTVupgrade /# cd /tivo/etc/rc.d
PTVupgrade /# pico rc.sysinit.author

The Pico editor will start, now copy the following text:

UW PICO(tm) 3.8           File: rc.sysinit.author           Modified

Be VERY accurate in what you are doing! Verify this text at least 3 times (I know I did).
Once you're sure you did it right: press CTRL+X. This will exit the editor.
The editor will ask you if you want to save the modifications, press the "Y" key.
Then it will ask if your want to use the rc.sysinit.author filename. Press the ENTER key.
Pico will now report how many lines it has written and will return to the Shell prompt.

You can verify (if you want to) the content of the rc.sysinit.author file by typing: more rc.sysinit.author. This will display the file content.

The next step wih this file is to make it executable:

PTVupgrade /# chmod 755 rc.sysinit.author

One last thing we have to do is to disable the netfilter, so your TiVo is not limited in it's ability to connect to other IP-addresses. We will do this by renaming the netfilter file:

PTVupgrade /# mv /tivo/etc/netfilter-enable /tivo/etc/netfilter-notenabled
      

Basically we're done now, so it's time to prepare your PC for a shutdown:

PTVupgrade /# cd /
PTVupgrade /# umount -f -a -r
PTVupgrade /# halt
The system is going down NOW !!
The system is halted. Press Reset or turn off power
System halted.

You can now rutn off the power of your PC.

STEP 11 - Putting the new disk into the TiVo

Now we're ready for our first run.

Remove the TiVo disk from your PC, and install it into the TiVo (look at the pictures where I show you how to get the disk out).
I have not used a dual disk setup - so I have no clue what to do with that. But with a single disk setup, you can leave the jumpers of the disk to MASTER.

Tip: this might also be good time to clean the fan of your TiVo. Just like with PC's these fans suck in a lot of dust.

After putting the disk into the TiVo, make sure that:

• The IDE cable is connected to the harddrive
• The POWER cable is connected to the harddrive
• The flatcable from the mainboard to the TiVo front is still connected and secure
• DO NOT CONNECT the phoneline!
• Plugin your USB to Ethernet adapter if you want to use one!

If you're sure about this, then connect the dish cables, the audio/video cables, and your USB ethernet adapter (hooked up to the network). Make sure your TV is ON and on the right channel! Again, even for DirecTiVo's: DO NOT CONNECT THE PHONELINE!

I recommend doing a double check here. If you're sure everything is fine, and you have you remote handy, then connect the power connector.

The TiVo will start showing the following screens:

DirecTiVo with TiVo OS 4 running!

Between screens 1 and 2, you will see a black screen for a bit (about 10 to 20 seconds).
Screen 4 appears when you haven't hooked up your regular antenna (why would I need that again?).

ERROR MESSAGES ONLY:
If you get screen 4 "Error tuning Live TV", or a screen saying "Error 51" - a common message you will get, it is related to using an image on another machine - then the Guided Setup will not start. You will need to go to the "TiVo Messages & Setup" - "Restart or Reset System" - "Clear and Delete Everything" to clear problems. The pictures below illustrate this procedure:

DirecTiVo - Clear and Delete ALL settings

Now they scared me for a minute there with their nice 1 hour message, but in the end it took about 35 minutes for my TiVo to Clear and Delete everything. Oh, the parental code is "0000".

Once done it reboots the TiVo, showing again the welcome screen and such, but this time without an error message going straight to the "Guided Setup". The Guided Setup is a basic question and answer game, so just read the questions and answer them accordingly. Some screenshots:

DirecTiVo - Guided Setup

Note: during this process it will ask you to ACTIVATE your account. DO NOT DO THIS. Your account/card has already been activated before, so just press the TIVO button.

DirecTiVo - DO NOT reactivate your card!

Once complete you can look at the system information page:

DirecTiVo - Woooohooo, OS4 running

In the setup info you will notice that the TiVo (DVR) has no name, and that the HMO options are not enabled.
Other items we need to fix: make a fake call daily, and maximum speed for USB 2.0 adapters :-)

Note: it will take up to 2 days before your TiVo has all the Guide info up to date.

Also check, incase you have one connected, if your USB ethernet adapter is active. Most of these adapters show connectivity by one or more led's lighting up. To make sure this happens:

• Connect the USB adapter to the TiVo
• Connect the USB adapter to the network, router, hub or whatever
• Make sure the ethernet cable you're using is a GOOD and WORKING cable

Once the system has started, go to the menu "System Information" - "Settings" - "Phone and Network Setup" - "Edit Phone or Network settings". In the now showing menu you can choose:

DirecTiVo - Setting your network settings

First set the "TCP/IP settings". To keep things easy you can either set a fixed IP address (at least you'll know which one that will be) or a DHCP IP address (at least you know the settings are right). I used a fixed IP address, so I don't have to snoop around to find where my TiVo is.

Wireless users: you might want to checkout the wireless options here. I do not have a wireless adapter so I wouldn't know what to do with it.

STEP 12 - Even more patches ...

In this step we will deal with some of the items I mentioned before, like the name of the DVR and such.

First of all: we need a network connection to the TiVo!

We need to setup a telnet connection to our TiVo, personally I prefer using PuTTY (see our downloadspage), but the regular Telnet command in Windows will work just fine too.

So start your engines and setup a telnet session (in a DOS box in Windows: telnet <ip-address>):

DirecTiVo - Telnet session to your TiVo box

The telnet session will show you the shell prompt of your TiVo: "bash-2.02# ". You can see this as a kind of DOS on your TiVo (allthough a Linux Shell is far more powerfull than a crappy DOS shell).

Note: for a telnet session TCP/IP port 23 is used.

HMO, TIVO NAME, and GUIDE PATCH

To be able to change anything, we need to make sure the drive is set to read/write - the TiVo by default mounts it as a read-only drive.
Please note that if you had to use /dev/hda4 instead of /dev/hda7, then replace the 7 with a 4!

bash-2.02# mount -o remount,rw /dev/hda7

Now it's time for some changes (NutKase superpatch, and name setting). Replace YOURTIVONAME with the name you wish to use to identify your TiVo.

Note: The name of your TiVo (allthough not recommended) can have spaces. You will need to put double quotes around the name!

bash-2.02# cd /hacks/ 
bash-2.02# chmod 755 superpatch-4all-NutKase-0.7.1.tcl 
bash-2.02# ./superpatch-4all-NutKase-0.7.1.tcl 

Superpatch-4All-NutKase-0.7.1
(C) 8/21/2004 by NutKase - COMMERCIAL USE PROHIBITED

bash-2.02# chmod 755 set_mrv_name_ADH.tcl 
bash-2.02# ./set_mrv_name_ADH.tcl YOURTIVONAME 
Setting nametable for "YOURTIVONAME"...
bash-2.02# chmod 755 guide_patch_v401b.tcl 
bash-2.02# cp /tvbin/tivoapp /tvbin/tivoapp.guide_patch 
bash-2.02# ./guide_patch_v401b.tcl /tvbin/tivoapp.guide_patch 

guide_patch_v401b.tcl
(C) 11/22/2004 by AhoyMatey - COMMERCIAL USE PROHIBITED

Thanks to MuscleNerd who wrote the original 4.0 guide patch
Thanks to alldeadhomiez for all his advice and help

File was patched

bash-2.02# mv /tvbin/tivoapp.guide_patch /tvbin/tivoapp 

It is good practice to remount the disk as a read-only drive (if this fails, you can reboot anyway).
Please note that if you had to use /dev/hda4 instead of /dev/hda7, then replace the 7 with a 4!

bash-2.02# mount -o remount,ro /dev/hda7

You will now need to reboot your TiVo.

Note: it can take 1 to 2 days before your guide data is all complete again!

FAKE CALLS and LOG WIPING

Based on AlphaWolfs suggestion in this thread in the DealDatabase, we can use crond to make fake calls daily and have the log file wiped every day. Cron is commonly used in Linux/Unix for running tasks automatically at certain times.

Agian: To be able to change anything, we need to make sure the drive is set to read/write - the TiVo by default mounts it as a read-only drive. Please note that if you had to use /dev/hda4 instead of /dev/hda7, then replace the 7 with a 4!

bash-2.02# mount -o remount,rw /dev/hda7

Next execute these instructions:

bash-2.02# echo "root:x:0:0:root:/:/bin/sh" >> /etc/passwd 
bash-2.02# echo "root:x:0:" >> /etc/group
bash-2.02# mkdir -p /var/spool/cron/crontabs
bash-2.02# touch /var/spool/cron/crontabs/root
bash-2.02# echo "0 0 * * * fakecall.tcl" >> /var/spool/cron/crontabs/root
bash-2.02# echo "0 0 * * * wipelogs" >> /var/spool/cron/crontabs/root
bash-2.02# echo "/busybox/crond" >> //etc/rc.d/rc.sysinit.author
bash-2.02# crond
      

This will prepare the required files for crond to run (autostart, and such).

If you're not apply any other hacks, then mount the disk as read only again:
Please note that if you had to use /dev/hda4 instead of /dev/hda7, then replace the 7 with a 4!

bash-2.02# mount -o remount,ro /dev/hda7

USB 2.0 at maximum speed

FOR USB 2.0 USERS ONLY!

The standard TiVo software does not seem to utilize the full capacity of the USB 2.0 standard. So for those of you who do use a USB 2.0 device (for example the LinkSys USB200M - like I do - more models can be found at the bottom of the Sleeper Hack page), this will be a speed booster (about 3 times faster!)!

The required drivers can be download from your TiVo directly, and this method will be used.

If you haven't done so: make the TiVo disk read/write. Please note that if you had to use /dev/hda4 instead of /dev/hda7, then replace the 7 with a 4!

bash-2.02# mount -o remount,rw /dev/hda7

Note: these instructions are based on David's intructions.

bash-2.02# cd /hacks
bash-2.02# wget http://www.weethet.nl/downloads/usb20.tar.gz
Connecting to www.weethet.nl[83.98.147.3]:80
usb20.tar.gz   100% |************************************| 99571  00:00 ETA
bash-2.02# tar -zvxf usb20.tar.gz
usb20netmodules-2.4.18
usb20netmodules-2.4.18/usbnet.o
usb20netmodules-2.4.18/ehci-dummy.o
usb20netmodules-2.4.18/usbcore.o
usb20netmodules-2.4.18/usb-ohci.o
bash-2.02# cd /lib/modules/
bash-2.02# mkdir backup
bash-2.02# mv ax8817x.o backup/
bash-2.02# mv usbcore.o backup/
bash-2.02# mv usb-ohci.o backup/
bash-2.02# mv /hacks/usb20netmodules-2.4.18/usbcore.o /lib/modules/
bash-2.02# mv /hacks/usb20netmodules-2.4.18/usb-ohci.o /lib/modules/
bash-2.02# mv /hacks/usb20netmodules-2.4.18/usbnet.o /lib/modules/
bash-2.02# ln -s /lib/modules/usbnet.o /lib/modules/ax8817x.o
bash-2.02# rm -rf /hacks/usb20*

Now we need to edit the test.conf file. The original content of this file, which resides in root (type: more /test.conf to see the content), is:

#!/bin/bash

echo "starting test.conf"
export PATH=./:.:/utils:/bin:/sbin:/tvbin:/tivobin:/busybox
export upgradesoftware=false
for foo in /init/*.init ; do
echo "starting $foo"
$foo
done

This file is executed during the boot of your TiVo, before system initialization scripts kick in. This file allows you to add scripts/mods. We need to add some lines here:

/sbin/insmod /lib/modules/usbcore.o log2_irq_thresh=4
/sbin/insmod /lib/modules/usbnet.o
/sbin/insmod /lib/modules/usb-ohci.o

There are a few ways to do this, probably the easiest is either using "vi" or the "echo" command. Since not everybody is equally skilled with VI, I suggest using the echo command. We have seen the use of this before, so use the command as displayed below:

bash-2.02# echo "/sbin/insmod /lib/modules/usbcore.o log2_irq_thresh=4" >> /test.conf
bash-2.02# echo "/sbin/insmod /lib/modules/usbnet.o" >> /test.conf
bash-2.02# echo "/sbin/insmod /lib/modules/usb-ohci.o" >> /test.conf

This should be it.

Mount the disk as read only again, and reboot your TiVo.
Please note that if you had to use /dev/hda4 instead of /dev/hda7, then replace the 7 with a 4!

bash-2.02# mount -o remount,ro /dev/hda7

Links en meer LeesVoer

Een van de doelen van deze was video downloaden naar de PC.
Met name door deze Sleeper Hack kunnen we dit nu doen.

Ik heb een artikel geschreven op basis van TyTools, je kunt het hier vinden.

Meer TiVo gerelateerde links:

TiVo Supplies:

PTVupgrade - Supplies image, tools, disks, etc en een goed TiVo forum en de beste TiVo images.
TiVo - De TiVo company ...
DirecTV - Levert DirecTiVo's voor hun DirecTV service.
9thTee - Supplies, meer gericht op oudere TiVo's.
Weaknees - Supplies en TiVo's.

Video Download:

EtiVo - Alternatief voor TyTools.
gtivo - a GTK/Gnome (Linux) applicatie voor TiVo
TyTool - homepage van TyTool?
Oude TyTool/TyStudio Sourceforge project
ty-mp4-rrs - Transcode ty-files naar MP4 tbv RSS feeds.
TiVoTool - Het TyTool alternatief voor Mac OSX en Linux (zie ook deze wiki).
TiVo-MPlayer - kan Ty-streams weergeven, intussen geintegreerd in mplayer (voor o.a. Windows, Max OS X, Amiga, en Linux).
TyShow - DirectShow hulpmiddel zodat Ty-files met Media Player afgespeeld kunnen worden.
Media Player Classic - een toffe vervanging van de Windows Media speler.

Hacks, Patches:

Sleeper Hack - OS 3.x Hack voor DirecTiVo (dit artikel)
OS 4.x Hack - OS 4.x hack die HMO en MRV mogelijk maakt
OS 6.2 Hack - OS 6.2 hack die HMO en MRV mogelijk maakt
DealDatabase - HET forum voor TiVo fans!
6.2 Slice Upgrade Guide - door David Dellanave

Forums:

PTVupgrade forum - van de makers van InstantCake and PTVnet.
DealDatabase -HET forum voor TiVo fans!
TiVo Techies

Home Media Option (HMO):

JavaHMO - Media server voor de nieuwe TiVo HMO features.
Galleon - Alternatieve Media server voor HMO.

TiVoWeb

TiVoWeb Modules