On this page...

Page overview

• Step 1: Have your MPEG-2 movie file(s) ready
• Step 2: The proper settings in Nero
• Step 3: Adding movie files
• Step 4: Burn that puppy

Step 1: Have the proper MPEG2 file ready

You will, naturally, need the movie file or files (you can put multiple movies or parts of movies on one Super VideoCD). The MPEG-2 should match the standard you want to target, ie. PAL or NTSC. Preferably use PAL since the resolution of a PAL movie is slightly better than that of a NTSC movie and most stand-alone players seem to be able to playback PAL and NTSC mixed anyway without any trouble.

Make sure you test this first with your DVD player!
In this test you can also see if your standalone player can handle CDR and/or CDRW discs. Some older DVD players cannot read CD-Recordables, instead try a CD-ReWritable disc since the laser reflection of these discs almost matches that of a regular DVD.

In short;

Make you choice now and remember the info of these tables above.

Note: Audiobitrate is not fixed to 224 kbps, however it is advisable to use this format. Lower bitrates take less space but quality is poor. Higher bitrates renders better sound quality but some DVD players might experience trouble with these VCD's ... if you have to select a higher quality, the go for 320 Kbps.

Step 2: Proper settings in Nero

OK, now we have the movie file, we will start Nero.

Nero usually starts either with the Wizard window or with the "New compilation" window.

In case the wizard starts:
click the "Close Wizard" window so Nero will bring you to the "New Compilation" window.

In case neither windows appear:
either select "File" from the menu and choose "New..." or click the "New Compilation" button ().

In the "New Compilation" window we now select the "Super Video CD" icon as shown here on the right, which will open the options for our new VideoCD. Note: For the rest of this tutorial I'm assuming you're about to make a PAL VideoCD. The only differences with an NTSC VideoCD is the option "NTSC" instead of "PAL" and the MPEG2 movie format used as mentioned above. Note: Click the tab "Video CD" if this is not the currently displayed tab.

For you're first VideoCD I'd like to suggest to use the settings as seen above. NTSC users might want to check NTSC instead of PAL.

Now go to the next tab, called "Menu".
To keep things simple, we will skip this item in this tutorial, make sure "Enable menu" is not checked.

Note:
Here you can create an entire navigation menu for your Super VideoCD. Check the page "CDRW - Creating a Super Video with Nero with menu's" for a complete discription of the use of menu's.

Click the tab "ISO".
Verify that only these options are checked (this is the default setting):

• ISO Level2 (Max. of 31 chars)
• ISO 9660
• Allow pathdepth of more than 8 directories
• Allow more than 255 characters in path

NO other option should be checked!

Now we go to the tab "Label".
In the field "Volume label" we can now enter the title of our Super VideoCD. Usually it's a straight forward name.

Tip: If a movie spans multiple VideoCDs I usually end the title with "_AOFB" where A equals the disc number in the sequence and B equals the number of discs in this set.

Note:
In the volume label, special characters like "/", "\" and a space are not allowed. It is common practice to use an underscore ("_") as a replacement of the space character.

Dates can optionally be set at the "Dates" tab.
I usually set the date here to "Use current date and time" for my personal reference, however the default setting will do just fine. Alternatively you can enter a specific date indicating for example that this is the movie of your holiday of June 2001.

At the "Misc" tab we do not need to set anything.

The "Burn" tab is not an issue right now either.

Finally click the "New" button.

Step 3: Adding files.

After we clicked the "New" button, this compilation windows will appear.

Use drag and drop to place a movie file (MPEG2, either with MPG or MPEG file extension) as shown below. Drag and drop can be used with the buildin explorer of Nero or using the Windows Explorer (by draging a file from the Windows Explorer to Nero).

Note: Other formats are supported as well - Nero will transcode/convert these files. Just ckeep in mind that the quality might be disappointing!

For those unfamiliar with drag and drop:
In the right pane you click through the discs of your computer as you would do with the Windows Explorer. When you finally found the file or files you want to add, use the left mouse button to select that particular file and keep the left mouse button pressed. Now move your mouse until is is positioned over the pane part pointed with the red arrow in the screenshot below. Once the mouse is at that position, you can release the mouse button and Nero will add the file.

You can add as many movieparts as you like. The order shown in the window pointed by the red arrow as seen in the screenshot above, will be the playback order of your movies. You can change the order using drag and drop within this little window.

When you dragged a illegal video file format to the track section, you will get an error message:

This error leaves us with three options:

• 1. Ignore it: Turn off standard compliance and continue
  
  Not advisable, but then again most DVD players seem to be able to handle VCD's that are not 100% Super VideoCD compliant.
  
• 2. Re-encode the video file
  
  Also not advisable.
  The buildin transcoder can convert the file (not the orginal one) to the proper VideoCD specifications. Yes even a DivX will be transcoded to MPEG-2.
  Warning: The QUALITY of this transcoded file might be rather poor!
  
• 3. Do not add this file: Cancel
  
  This is what I would do and use some tool to transcode it to the proper format.
  A proper tutorial on this subject will follow soon.

Note that the capacity of a CD is limited - the amount of space used is visable in the bar at the bottom of the Nero window, in this screenshot we used about 50 Mb's of movie data:

Tip:
A Super VideoCD can hold more data on a CD than a regular CDRom. This is due to the different level of error correction. A 80 minute CDR can hold app. 810 Mb of VideoCD data. So the indicators (the yellow and red dotted lines in the progress bar) are not indicating the proper capacity.

Step 4: Burning the Super VideoCD

OK, now we've made our compilation, it's time to burn that puppy.

Click the "Burn" icon () or click in the "File" menu, the option "Write CD ...".

The "New compilation" window appears again, this time showing the "Burn" tab.
Here you can choose to simulate and test the writing proces but if you have done this before I'd go for these options:

• "Write"
• "Finalize CD (No further writing possible!)"
• "Write Speed" set to maximum
• "Write method" set to "Disc-at-once" (not all CD-writers support this - in that case select "Track-at-once")
• "Number of copies" set to "1" unless you want more copies
• Activate "Burnproof" or "Exalink" if available (not all writers support this)

Finally click the "Write" button and wait for the CD to complete.

After the CD has been completely burned, you can try it on your PC using (for example) PowerDVD, or play it on your standalone DVD player to see if it all works.

Note:
For playback on a PC you MUST have a software DVD-player like PowerDVD - Windows Media Player will playback MPEG2 files, unless you have a software DVD-player installed.
The MPEG2 files can be found in the folder "MPEG2" of your Super VideoCD and the first file is usually called "AVSEQ01.MPG".